Novelty Installation And Review Videos


Chevrolet Bowtie LED Lighted Emblem Installation - 2002 Chevrolet Silverado- Video

Chevrolet Bowtie LED Lighted Emblem Installation - 2002 Chevrolet Silverado

Today on our 2002 Chevrolet Silverado we're going to be taking a look at installing the Reese Chevrolet Bowtie LED Lighted Vehicle Emblem. Part Number: RP86618. We'll be installing this in conjunction with the Hopkins 4-Pole Loop. Part Number: HM48145. Here's what it looks like when it's installed. As you can see when it's on during the daylight it's just going to be like a black metallic coating. When you apply your tail lights or your breaks it's going to become transparent and the red LEDs are going to light up through. more


Watch Video

4/6/2016 11:21:06 AM



Reese GMC LED Lighted Vehicle Emblem Installation - 2011 GMC Acadia- Video

Reese GMC LED Lighted Vehicle Emblem Installation - 2011 GMC Acadia

Today on this 2011 GMC Acadia were going to install part number 86091 from Reese. Our first step to install this is go ahead and remove the original logo. Well go ahead and use a fishing line to separate the logo from the vehicle. With all adhesive removed from the vehicle, now Ill go ahead and mark for a hole we need to drill for our wire. We measure from the bottom of a new logo to where the wires are and then from the center, the M on the logo, over. Once we have our marks we can go ahead and drill out a 1/4-inch hole. more


Watch Video

7/25/2012 8:59:43 AM



  1