bing tracking image

UWS Crossover Toolbox Review - 2012 Chevrolet Silverado

content loading

Customers compare UWS00156 to these similar products

Products Featured in this Video

Review of the UWS Crossover Toolbox on a 2012 Chevrolet Silverado

Today on this 2012 Chevrolet Silverado, were going to do a test fit of part number UWS00156 from UWS. This is a truck bed toolbox, narrow crossover style. The dimensions of the box are 69 inches long by 12 inches wide and nine and a quarter inches deep, and above the bedrails is about two inches in height. Well start off our test fit by putting it into the bed, and well scoot it up as close as we can to the edge of the bed, and then well open up our lid to check for clearance. Now, it looks like with the box pushed already up against the bed, we have plenty of clearance for the cab. That measurement will be two and three quarter inches.

The gap between the bedrails and the box on each side is going to be about an inch and a half. Then our dimension between the bottom of the box to the bed will be 13 inches. You see how its two stainless steel handles on each side, the drivers side is locking and the lid of the box is foam filled for durability and strength. We also can change the tray to hold small items, and you can move it left or right as needed. This box is made in the U.S.A.

With that, that will finish it for our test fit of part number UWS00156 from UWS on our 2012 Chevrolet Silverado.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Andrew K
Video by:
Andrew K
Employee Patrick B
Installed by:
Patrick B
Employee Dustin K
Video Edited:
Dustin K
Employee Zach D
Video Edited:
Zach D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.