Feature Review TireMinder Tire Pressure Gauge Video

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the letter R and D in the tire size you mentioned has to do with the construction of the tire. R stands for radial and D stands for Bias Ply. The main difference between a radial ply and a bias ply tire is how the tire is…

The most common lug nut socket sizes for trailers are as follows; 13/16", 7/8", 17mm, and 19mm. I would be willing to bet you need a 13/16" socket but in order to be sure you get the correct size you should consider the Telescoping Lug…

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

Hey Dean, with a front sway bar like part #RM-1139-176 and stabilizer like part #RM-1139-176 you should see some improvement in tire wear on the outsides of the tires mainly from the sway bar. The sway bar will help keep the vehicle more level around…

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…

Hey Tim, you wouldn't want to use your brake controller install wiring to install the part #RM-98850 as it's a totally different setup. If you check out the install instructions link I attached on this page you will see where it should be…

The installation instructions for Roadmaster second RV kit #RM-98850 are pretty straight forward. You would not tap into the blue wire because on a 7-Way blue is usually for electric brakes. If tapped into the blue wire the light would not work…