Thule Hitching Post Pro Hitch Bike Racks Review - 2010 Jeep Commander

content loading



Customers compare TH934XTR to these similar products




Products Featured in this Video



Review of the Thule Hitching-Post-Pro Hitch-Bike Racks on a 2010 Jeep Commander


Today on our 2010 Jeep Commander we're going to be test fitting the Thule Hitching Post Pro. This is a folding and tilting 4-bike rack designed for use in 1-1/4" and 2" hitches. Its part number is TH934XTR. Now to begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. As we do this we're going to want to line up our threaded hole with the hole that's in the receiver tube. With those lined up we're going to thread in our anti-rattle bolt and tighten it down using our wrench.

In this position our rack is going to offer us about 20" worth of ground clearance. At its closest point to the back of our vehicle it's going to be about 7-1/4" away. Overall we've added about 16-1/2" to the length of the Commander. At the base of the rack here there's a gold pin and clip combo. Pulling that allows us to tilt the mast and rack away from our vehicle. As you can see, that gives us all the clearance we need to access our cargo area.

Now bring our mast back into its upright position and we're going to reinsert the pin and clip to hold it there. We'll then come right up here to the top of the mast where we'll have a second gold pin and clip combo. Pulling that allows us to rotate our dual cradle arms up into position. We'll then slide this pin and clip back through to hold them in place. Now with the arms extended like they are we've added about 37" to the length of the Jeep. To load our bike we're going to undo our cradle straps, grab our bike, place it up into our cradles, and begin securing it using our straps.

With our bike all loaded up we're ready to hit the road. We'll take it through our slalom course, our alternating bumps, and our solid bumps to let you see what it looks like in action. That will complete today's test fit of the Thule Hitching Post Pro, part number TH934XTR, on our 2010 Jeep Commander. Here on our test course we'll start by going through the slalom. This is going to show us the side to side action. This simulates turning corners or evasively maneuvering.

Once we get to the alternating speed bumps we'll see the twisting action. This will simulate hitting a curb or a pothole or driving over uneven pavement. Once we get to the full speed bumps we'll see the up and down action. This will be just like driving in and out of a parking lot, parking garage, or driveway. .


Questions and Comments about this Video

add comment

Info for this part was:

Test Fit:
Joe V
Video Edited:
Zack K
Video Edited:
Andrew K
Test Fit:
Patrick B
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Test Fit:
Rick A
Test Fit:
Colin H
Test Fit:
Matthew K
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Test Fit:
Sabrina B
Test Fit:
Cole B
Video by:
Alan C
Video Edited:
Sue W
Test Fit:
Randy B
Video Edited:
Chris R
Test Fit:
Hayden R
Test Fit:
Joe B
Test Fit:
Savanna B
Video Edited:
Zach D
Video by:
Jonathan Y
Test Fit:
Robert C
Video by:
Michael B
Test Fit:
Jacob H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.