Rola Ladder Racks Review - 2015 Ford F-150

content loading

Review of the Rola Ladder Racks on a 2015 Ford F-150


Today on our 2015 Ford F-150 we're doing a test fit of the roller truck bed ladder rack. That part number is 59742. This ladder rack is designed to work with up to 400 pounds, and we've already got three of our four sides down and connected so we're just going to do our last two clamps over here on our passenger side in the rear. You're going to set the clamps down here. If we take a look at them we will bolt and then wing nut at the top here. What we'll do is we'll sit it around our tuck bed and then we'll start by taking down our bolt. That's going to push that piece just up so it's sitting up against the truck bed.

We're going to start wrilying there. I like to hand tight and everything first. All right with that all in hand tight I have a 14mm wrench here, and we're just going to tighten that down the rest of the way, and then that wing nut on the inside we're going to tighten that down so it sits right up against the bottom of our clamp here, and that's going to secure that in place. I'll do the same thing on the other side, and if your clump moves a little bit its helpful to just hold it in place there. This ladder racks are great for holding ladders, any type of lumber or larger loads that you may have, and you can always strap them down using any kind of straps that you may have just to secure that to your truck and your ladder rack. That's tightened we'll again take the wrench and just secure it even more, and tighten the wing nut around the bottom, and you're allready to hit the road. We'll just close up our tail gate, and that will be our look at the roller truck bed ladder rack part number 59742 on our 2015 Ford 5-150.


Questions and Comments about this Video