Hands-On with the 2.5-Watt Solar Battery Charger Video

You would want to go with a deep cell battery. Having a battery larger than you would need would be the way to go as having a battery that is similarly rated as the draw of the winch will drain it quickly. We don't carry any deep cell batteries…

You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…

For a 12,000 lb. electric car trailer winch like the Bulldog Winch Trailer Winch part #BDW10040, I recommend a standard 12 volt lead acid battery rated up to at least 650 cold cranking amps (CCA). As long as the battery is rated up to 650 CCA then…

Part #PTW2997 works great for charging your breakaway battery when the trailer is not in use. This product is easy to hook up and fairly inexpensive compared to the price of a new battery. I strongly recommend this product. We do not carry any…

The 2.5-Watt Solar Battery Charger #PTW2997 cannot remain connected while the engine is running. The installation instructions from the manufacturer (which are attached) state "CAUTION: Disconnect the solar battery charger from automotive 12 V…

The overall dimensions of the 2.5-Watt Solar Battery Charger part #PTW2997 are 13-3/4" long x 4-3/4" wide. The panel dimensions are 11-3/4" long x 3-5/8" wide. I have attached a photo below with these dimensions.

Yes, you can charge the 12V battery on your Bright Way Trailer Breakaway Kit with 0.5-Amp Charger and 5 Ah Battery #3802339 while in storage. If you don't already have a charger you can use the CTEK MULTI US 7002 12-Volt Universal Battery Charger…

To charge the battery in the Engager Trailer BreakAway Kit, #20099, you can attach the wire from the 12 volt circuit on the trailer side 7-Way (1 oclock position on the back of the trailer side 7-Way where the wires attach) to the input wire on the…

It would be a good idea to add a support plate, like #BDSPB50, when installing A-frame jack #BD1550101344. The plate can be welded or bolted on. This plate fits on the underside of the trailer. The jack will then bolt into place. If you need a foot…

The Superwinch S7500 Trailer Winch #SW1475201 is designed to have more of a "universal" style for mounting and may require some adaption for installation because it does not have a typical mounting pattern. The Superwinch S7500 Trailer…

That is the only way you'd be able to install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 on your 2023 Ford Transit T350 since there is no custom fit wiring harness. To install this, you'll first need to find the cold side of the…

From our experience the military trailer you have uses a standard lunette ring so a pintle hook like the Curt #C48005 would work fine.