bing tracking image

MORryde Driver Side Fender Mounted Jerry Can Holder Review

content loading

Products Featured in this Video

Review of the MORryde Driver Side Fender Mounted Jerry Can Holder

What's up everybody. It's AJ with Today we are gonna be checking out, this more ride fender mounted, Jerry can't hold her. Now this is going to work on your Jeep. J.K and J.K limited. And what it's going to be for It is a dedicated spot for your gas can.

That way you don't have to try and put it on the inside out of your Jeep or put it in your cargo basket, you have up there, and has a dedicated spot. It stays right here. It stays in place and doesn't even rattle. Let's check it out. Seems to be great if you off-road a bunch or even if you'd like to go over landing you always want to make sure you have that gas with you just in case you get too far away from the gas station.

There's not one anywhere near, you gonna have this so you can get back. So this is a good option because again, if you're off-roading or overlanding, you know, if you're overlanding and you might have a tent up top, so that's gonna limit your space up there. You can't have a cargo carry up there, and then you can't have a cargo carry on your hitch either. Cause if you're off-roading, then you're going to go to those inclines. You don't have that ground clearance for the cargo carriers.

So you're not gonna put anything in your hitch. This is the best spot for it to go because it's out of the way and secure. What it's made for its made for gas cans up to five gowns. So we have it kind of maxed out right here with the native sour gas can, it will also work with Sceptre gas cans. And it comes with this ratchet strap included.

So it's got the points here at the bottom for the hooks to go in there. That way you can get this really tight. You can see we're shaking back and forth. There's a little movement but, not much at all. I can actually shake the whole Jeep from the mounted position back and forth. So that's not going anywhere, either. Adding it onto your Jeep, it is going to add about an inch from the fender, well here you can see its six hours a little bit more, and that's what standard Jeep tire. So chances are, if you have bigger off-road tires, they're going to stick out a little bit further anyway. The one issue we found though, and that's because we have the maximum gas can in there too, by the way if your gas cans small, you're not going to have this issue. But the door does hit! But the door is pretty open for that to happen. So we're about here is where it makes contact. But if you come over here and look this is pretty wide open here, I mean, that's, you can still get in and out of your Jeep, just fine. You just won't be able to fling that door open. The whole thing's going to be made of a black powder coat steel. Let's get some measurements here on the inside from inside the inside. It's going to be 14 and a quarter inches here from here to here. And then, on the back, its gonna be seven and a quarter inches from right there to right there. As far as installs go, it can be a little intimidating when you're first going over the instructions, but it really isn't that bad. You're going to be taking some bolts out and some panels out here. You're gonna have to remove the entire running board down here, install this bracket. But the good news is you don't have to drill. You're really just removing bolts and replacing those bolts when you add these brackets on there. But that being said, this is one of those things that once you get it installed, it's staying there in place. It's not gonna be one of the things you easily just take off and put on whenever you want. Overall, it was a little bit more of an in-depth install and I thought it was going to be originally. But, It wasn't too bad! We got it done pretty quickly. It's on there, nice and tight. I can just shake the whole Jeep from this mount. So it's not going anywhere that in combination with the strap, the red strap it comes with holds it in there. Nice and tight too. There's not going to be rattling while you're driving down the road. And it's got those rubber stoppers in there with that bottom. So there's not going to be a bunch of clanging, rattling while you're driving. It's there, it's nice and mounted. Do you have somewhere to put your gas can now that's not inside your vehicle or trying to find space for it somewhere else. It's got a dedicated spot. So it's going to be here and out of the way saving room and other places. Plus it just looks cool and makes your Jeep look even more utility. Well, thanks for hanging out. And I hope this helps..

Info for this part was:

Employee Andrew K
Test Fit:
Andrew K
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Michael B
Installed by:
Michael B
Employee Aidan B
Video by:
Aidan B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.