What to Know About the MaxxTow Coupler Latch Lock for Surge Brake Actuators Video

The Trailer Coupler Lock #e98887 will work with a UFP A-60 coupler like your Dexter A-60 #DX56FR. The product picture for this lock shows it being used on an A-60.

I am happy to suggest a flat tow setup for your 2012 Ford F-150 Platinum EcoBoost 4x4 super crew. Since your truck is 4wd you are good to tow with all 4 wheels on the ground. You will need to place the transfer case in neutral and engage the four…

I would love to help you with all the issues you're having but sadly I cannot since it's a factory trailer brake controller. That said, I think it's time you find a new dealer or service center if they were unwilling to help as it's…

The most universal and effective coupler lock we offer is the Fastway Universal Lock part #FA86-0015-316 which I would recommend for your application. We've found this basically fits all couplers that are less than 4-1/2 inches in width. I…

Thanks for reaching out, Tripp! To get multiple locks keyed alike that are compatible with the Demco EZ-Latch you'll need to go with our etrailer Surge Brake Coupler Lock #e98888 - just be sure to choose the "keyed alike" option from…

Yes, the Karrier ST205/75R14 Radial Trailer Tire with 14" White Wheel part #AM32153 will fit a Magic Tilt Trailer Model CA1928W. If you need a carrier we have plenty of options like the CE Smith Spare Tire Carrier part #CE27202.

The tethered pin on the Dexter DX7.5 Drop-N-Go Brake Actuator part #099-175-20 is what will be used to secure the hitch ball inside the trailer coupler. If you're looking for security then this can be replaced with the etrailer Surge Brake…

I took a look at The MaxxTow Coupler Latch Lock for Surge Brake Actuators #MT76FR that you mentioned, and it doesn't look like it can't be keyed alike, however I do have another alternative for you. If you're okay with a little shorter…

This is an excellent question Brad. The Dexter DX7.5L A-60 Brake Actuator #DX83FR is designed to bolt to a 3" wide by 5" tall frame while the Actuator #DX27FR is designed to bolt to a 3" wide by 4" tall frame. This is the only…

Yes the Clamp-On Lift Brackets for Blue Ox SwayPro Weight Distribution Systems #BXW4010 that you referenced do fit boxed trailer frames.

The Blue Ox 2-Point Weight Distribution #BLU75FR is capable of a drop up to 2.75" and a maximum rise of 6.5".

I don't have the length of the spring bar arms on the Blue Ox 2-Point Weight Distribution System like part #BLU75FR but I can tell you that the frame brackets will need to be installed between 25-27" back on the frame from the center of the…