bing tracking image

Malone Cam Buckle Load Straps Review

content loading

Customers compare MPG307-9 to these similar products




Products Featured in this Video






Review of the Malone Cam Buckle Load Straps


Today we're going to be taking a look at the 12-foot long Malone Cam Buckle Load Straps with Buckle Protectors, part number MPG307-12. These also come in nine-feet long, 15-feet long as well as 18-feet long. The Malone Cam Buckle Load Straps with Buckle Protectors are great for tying down your kayaks, your canoes, or your stand up paddleboards on your Malone Water Sport Carriers. The rubber portion here underneath our buckle has a neoprene sleeve around it, and this is going to ensure that your kayak, your canoe, or your stand up paddleboard won't get scratched once this is being installed. These are UV resistant straps with cross-box stitching at the end for a sturdy hold. The buckles themselves are galvanized and corrosion resistant and have a no-slip center spring-tension device to make sure your strap stays tight. It has a pull strength of 1,200 pounds.

This will come in a quantity of two straps. Now that we've gone over some of the features of the strap, let's go ahead and show you how it installs. Once you open the package, these are the two straps that you'll get. Now we'll move on to our kayak carrier, install the straps and stow our kayak, cinch them down and we'll be ready to go. Putting our buckle end through first so making sure they sit inaudible 00:01:15 here on this particular kayak carrier. And we'll repeat that for our front mount. And now we can install our kayak.

So, we'll take our straps, bring them around the front of our kayak, making sure our buckles are about half-way up there. We'll do this for the front as well. How this particular kayak loads up, we'll bring our strap underneath and up. We'll come to our buckle here, and we'll pull our cover back just a little bit for a little bit better view here. You can see it has a point to thread our open-end strap through.

Push that through first. We'll feed it through our buckle, bring that down and around. We'll pull the strap nice and tight, pulling our protective cover back around it. Then tying off our excess. Now we're ready to attach our inaudible 00:02:22 tie-downs if we have them, and we're ready to hit the road. And there you have it for the Malone Cam Buckle Load Straps with Buckle Protectors..


Info for these parts were:

Employee Zack K
Installed by:
Zack K
Employee Cole B
Installed by:
Cole B
Employee Dustin K
Video Edited:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.