Inno Watersport Carriers Review - 2015 Toyota Sienna

content loading

Customers compare ina744 to these similar products

Products Featured in this Video

Review of the Inno Watersport Carriers on a 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to take a look at the Inno Boardlocker Board Carrier. That part number is INA744. Now I have one half of it on. I'm going to show you how easy it is to install the other one. All righty. We want to just pretty much try to line it up with the first one.

All right, line it up with the first one, then we can go ahead and clamp it down. There we go. Make sure that's all in. Now this pretty much fits around all your bars, your arrow bars, which we're using today and also your square bars and your elliptical bars. Go ahead and get this on here.

Get it nice and loose. There's a T-slot here. This just fits in. Go ahead and lift this up. Just got to get it loose enough to where it'll fit down in there.

I'm going to loosen the other side . That like that. All right, there we go, go that around there. Now what we're going to do is just pretty much take our cam lever here. We're going to tighten it up under the bottom and we're going to take our cam lever, fold it down, and I'm going to have to unloosen it a little bit. There we go.

We're going to slide it around here to this spot. Now we're going to go on the other side and do the other one. Now this can carry up to, I'm looking at 3 longboards, like your paddleboards or your short paddleboards. They also can carry up to 2 longboards, but we also can carry our surfboards, besides our paddleboards with this also. Okay, I'll loosen this one here. When I get it in the T-slot, we have to tighten it down and we're ready to go. We can load up our boards. There we go, so we got that in that T-slot. Once again put down our cam lever, slide it over nice and snug on there. Now we can load our boards up. I'm only going to load one surfboard and I need to unloosen it here, so what I'm going to do is lift up our lid. I'm sorry, let me open this door. We're going to lift up our lid here and we're going to unloosen this, so what we want to do is just push up on that lever and we can actually pull it out. Then when we're ready to tighten it down, we just grab here and we start turning. I've got those both up. All righty, let me go get my board. Slide that in like so. Now we're ready to tighten it down. We're going to just hold onto this, for our strap here, so that it fits nice and snug around our board, nice and tight. Close down that lid, and while I'm here I'm going to do this side. Nice and tight, close our lid. You see that it has a key for your anti-theft, so now we're ready to hit the beach. That's going to be our look at the Inno Boardlocker Board Carrier. Part number again is INA744 on today's 2015 Toyota Sienna. .

Questions and Comments about this Video

Info for this part was:

Video by:
Zack K
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Chris R
Video by:
Zach D
Video Edited:
Jacob T
Test Fit:
Keith V
Test Fit:
Jared G
Test Fit:
Savanna B
Test Fit:
Matthew S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.