Inno Watersport Carriers Review - 2015 Jeep Wrangler Unlimited

content loading

Customers compare INA744 to these similar products

Products Featured in this Video

Review of the Inno WaterSport Carriers on a 2015 Jeep Wrangler Unlimited

Today, on our 2015 Jeep Wrangler Unlimited, we're going to be doing a test fit of the Inno Boardlocker Board Carrier. This is going to be your roof rack mounted board carrier. Part number INA744. As you can see, we've already got one mounted up here on our aftermarket bars. We're going to show you how this one goes on, as well. First thing you're going to want to do is make sure that you have the brackets undone.

These are very simple to operate with a flip-fastener here. You'll simply slide that groove in after you have the bar in-between and then pull it down, like so, securing it. Make sure that one is undone and this one, as well. Then, we get it up here on top of the vehicle. Once we have it here on top, I'll flip that piece underneath and then clip the end in .. just like so.

We'll line it up with the other one and then fasten it down just a little bit. We'll turn that dial on the bottom and then we can fasten it. Make sure that this piece is undone, which is just going to be that secure lock piece at the top, then we'll be able to close it up like so. All right. Let me go over to the other side and fasten that one, as well, the exact same way. This is going to be for your surf boards.

Inno does offer a bigger one that can be for your paddle boards, as well. Slide it in just like so and tighten it down. All right. Now that we've gotten that tightened down and lined up with the back one, inaudible 02:48 .. If you take a tape measure and you measure from the bar back, they'll need to be lined up.

Maybe take a look at this one. It will be, as well. Next, we're going to unlock the top using the key and let out the crane which is going to be that silver piece on the back. That's going to arch it so you can slide your board in. We let this out and you can see, that gives us plenty of cable to slide our board underneath. We'll slide our board right underneath, making sure it's good, then we'll ratchet it down. Then, all we need to do is lock it. Your surf board isn't going anywhere and you're ready to hit the road with your all new Inno Boardlocker Board Carrier. Part number INA744 on our 2015 Jeep Wrangler Unlimited. Let's see how it does on our t . .

Questions and Comments about this Video

Info for this part was:

Video by:
Zack K
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Chris R
Video by:
Zach D
Video Edited:
Jacob T
Test Fit:
Keith V
Test Fit:
Jared G
Test Fit:
Savanna B
Test Fit:
Matthew S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.