View Cart

Inno Watersport Carriers Review - 2014 Ford Fiesta

content loading



Customers compare ina744 to these similar products




Products Featured in this Video



Review of the Inno Watersport Carriers on a 2014 Ford Fiesta


Today on our 2014 Ford Fiesta we're doing a test fit of the INNO board locker board carrier. That part number is INA744. We already have one part of it upfront. Very easy to install, we're going to install the second one now. We have our universal holders, pretty much can fit around any of our crossbars. Today we are using our square. We want to go up under our bar like that, that one over there, kind of line it up where it's even.

That's cool. Now all we do is put it through the slot, we have our cam lever here. Actually, I like to tighten it up from the bottom first. This has to come up because our cam lever is actually going to sit down right there just like that so that's nice and snug here. We go around to the other side, get this one started here. Same thing, our cam is going to go there.

That's not tight enough so we'll go ahead and tighten up the other side first. Alright, that's nice and snug now we are ready to load our board. This can hold up to one surfboard or one paddleboard. What we need to do is take off some of the slack in our line so we lift up our covers, little black lever here, we want to push up and actually it kind of spins out by itself. Just want enough to where we can get our board in.

We'll do the same thing on the other side. Alright, grab our surfboard, always slide it in from the back. Slide it on in, go as far as I can and we're ready to tighten it down. Bring down our levers. I just like to grab her here and just turn and it tightens up. When you get to the board is there, keep on tightening it, that's enough here.

Same thing on this side. Once again, nice and snug, close up. There's one thing I wanted to show you, back here, on this particular vehicle on the Fiesta it has an antenna that actually is in the way of our board. The good thing to do is to take it off. You can actually slide this over to one side to load it or just take it off until you get to your destination. That will be it for our look on our INNO board locker board carrier. That part number again is is INA744 on today's 2014 Ford Fiesta.


Questions and Comments about this Video

add comment

Info for this part was:

Video by:
Zack K
Video by:
Joshua S
Video Edited:
Jacob T
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Chris R
Test Fit:
Keith V
Test Fit:
Jared G
Test Fit:
Savanna B
Test Fit:
Matthew S
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.