Inno Truck Bed Bike Racks Review - 2016 Chevrolet Silverado 2500

content loading



Customers compare INRT201 to these similar products




Products Featured in this Video



Review of the Inno Truck Bed Bike Racks on a 2016 Chevrolet Silverado 2500


Today on our 2016 Chevrolet Silverado 2500 we're going to do a test fit of the Inno Velo Gripper bike rack for truck beds, part number INRT201. We have a bike already on it. We're going to show you how it's all hooked up. How it is pretty much hooked up, we have a strap around our forks and a strap right here around our seat pole. To disengage it we have a little slot here we just push and to engage it just throw it in there, pull it until it's nice and tight. So we'll go ahead and pull it out. We're going to do the other one also in the back.

Now, I'm going to take our bike out. Set this to the side. Now we're going to show you how we have all this hooked up. We're going to put our straps back in and we'll go over these first. We're using a road bike today but you can use mountain bikes, kid's bikes, or whatever you want to use. These two adjust.

You actually can go inward, which I'm doing now, or you can go outward, and pretty much like I said it just fits around your forks and this will fit around your seat. Now if you wanted to, say you have a bigger bike and you just wanted to adjust one, you can keep one clamped on and just move the other one. How we have this clamped onto our vehicle, we have a nice little spacer here that is pretty much going to protect our truck rails. We see we have a bed liner already on but we want to just make sure. Underneath this cam lever here actually tightens it up. There's a nice little block spacer under here that's going to clamp up under our rail so it's going to make it nice and secure on your truck bed.

Here we also have a D ring. That's going to be prepared if you needed a cable lock which you can find on our website if you wanted to lock your bike down and keep it in your vehicle. You just get that cable lock, thread it through the D ring here and you'll be ready to go. Other than that, that's it on our look on the Inno Velo Gripper bike rack for truck beds. That part number again is INRT201 on today's 2016 Chevrolet Silverado 2500.


Questions and Comments about this Video

add comment

Info for this part was:

Video by:
Zack K
Video by:
Andrew K
Video by:
Joshua S
Video by:
Kathleen M
Test Fit:
Zack K
Test Fit:
Randy B
Test Fit:
Keith V
Video Edited:
Jacob T
Video Edited:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.