Inno Roof Rack Review - 2013 Toyota Prius c

Products Featured in this Video

Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4

74 reviews

Code: INXS200

Price:  $197.99

• Roof Rack
• Feet
• 4 Pack

• Inno

These Flush feet help you mount 2 Inno Aero crossbars to your vehicle's naked roof to create a roof rack with a streamlined look. Hand knobs tighten feet in place on your roof. Locking covers secure system to roof.

Do you have a question about part INXS200?more information >     

Inno Aero Crossbars - Aluminum - Black - 36" Long - Qty 2

286 reviews

Code: INXB93-2

Price:  $197.98

• Roof Rack
• Crossbars
• Aero Bars
• 36 Inch Bar Space
• 2 Bars

• Overhang
• Black
• Inno

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Do you have a question about part INXB93-2?more information >     

Review of the Inno Roof Rack on a 2013 Toyota Prius c

Today on our 2013 Toyota Prius C we're going to do a test fit of the NOL crossbar roof rack. The crossbar numbers are INXB 93-2. The foot are INXS 200, and the fit kit is INK 416. Now we already have the first one on our vehicle. We're going to show you how we're going to install the second one. Pretty much this is all the stuff that comes with it, besides the first one. You have your crossbar, you have the foot here, the covers that go with the foot, the pad and clamp for the fit kit, and also the adapter for the foot and the 2 tools.

Now you need a tape measure also per instructions. So, let's go ahead and put our adapter on first. We're going to take this, pull out. Look it's got a groove right there, that's going to go underneath. Slide it in, slide it back. All right, then we're going to to take our foot here, this little stud here goes to the side there.

You're going to put it in, you're going to pull it out. Pull it to where we need to go. That's about right. Then we take our tool and tighten it down. Then we take our pad, just how you see that there are 4 screws there and one screw there, same way.

What we want to do is back this all the way out, slide that back in. All right. Now we're ready to open up our doors then we can put it on our vehicle. Now the first one I have it already measured from the, I'll show you here, from the center of the door jamb here to the middle of this crossbar, that's 13 cm. Now we're going to do this side, from the middle here to here, that's going to be 48 cm. Bring it over, sit it on our vehicle.

Then we're going to use our tape measure. It should be from here to there 48, so we need to bring it down some. That's about right there. Go on the other side. All right. Got her pretty much there. Now we're going to take our tool, start to tighten it up. All right. Start on this side first and then I'm going to move to the other side, just want to go back and forth, until you get it nice and snug. Now with the inner roof racking, you'll find the accessories on our website such as bike carriers, surf board and paddle board carriers, or any other accessory. Got it here, then I'm going on the other side, keep on turning. You just want to go back and forth so you don't want to have one side pulling to the other side. When this is tight, it's going to make a clicky noise so you can't turn it any more. It's getting pretty much tight. Right there, that's good, so we're going to close that door. Go ahead and continue tightening this one, then I'll put the covers on. There we go. All right. We're going to put our covers on. Make sure I've got the right side. There we go. Take our key and lock it up. Move to the other side. We're good to go. That's going to complete our look at the NOL Crossbar Roofing Rack on today's 2013 Toyota Prius C. .