Inno Roof Bike Racks Review - 2015 Hyundai Tucson
Customers compare INXA391 to these similar products
Products Featured in this Video
Review of the Inno Roof Bike Racks on a 2015 Hyundai Tucson
Male 1: Today, on our 2015 Hyundai Tucson, we're doing a test fit of NO Fork Lock with Mounting Bike Carrier. That part number is INXA391. See that we already have a bike in our rack. Show you some features now. Like I say, this is a fork-mounted bike rack, so we have a key for our anti-safety. So we can take that with anti-theft.
So we can take that off. Show you the skewer here has a lever. You pull back, unloosen it, remove them. You have a knob on the side. That's how you tighten it up and loosen it up also. Now, go towards the back.
We just have a strap that's holding down our back tires, so let's go ahead and remove that. Set that out of the way for right now. Then, like I say, pull your lever here and loosen the forks a little bit more. Now, you should be able to take off your bike. All righty. We're going to set this to the side.
We always say if you have straps on your bike rack, please replace them so they don't get damaged or lost, so we'll do that first. Like I said I was telling you, how this goes, you have the skewer. You have the adjust over here so you can make it loose or tighten. Clamps down. Like I said, it has the safety thing.
The one thing about this one, it goes into the t-slot. So how we're going to load this up, take this out. It has two slots, two Allen bolts here that have two slots underneath that can fit into your t-slot here. This also comes with a tool, a Allen wrench. To unloosen right it now, we're just going to back off a little bit but that'd be a way to tighten it. Also in the back, it's the same way. You have to take off your caps first to put it in. In this right here with the same tool can loosen and tighten, like so. Also, we have a knob under here to adjust the plate to whatever size your factory roofing system is. So you can put it in the t-slot. Like I said, you have your wheel carrier here, which can be moved on whatever type bike that you have. Let's close all this back up. Put all the caps back on. Now we can hit the road. So that'll be it for the look on the NO Fork Lock with Mounting Bike Rack, part number again is INXA391 on today's 2015 Hyundai Tucson. Let see how it does on our test course.Male 2: First is the slalom area, which simulates side-to-side action, like turning the corners or evasive maneuvers. Next are the alternate speed bumps, which show you the twisting action like hitting a pothole, road debris, or hitting a curb. Finally, we're at the solid speed bumps, which show you up-and-down action to simulate a parking garage or coming out of your driveway.
Info for this part was:
Video by:
Zack K
Video by:
Andrew K
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Dustin K
Test Fit:
Keith V
Test Fit:
Savanna B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.