bing tracking image

Gustafson Double Dome RV Pancake Light Installation

content loading

Customers compare 277-000340 to these similar products

Products Featured in this Video

How to Install the Gustafson Double Dome RV Pancake Light

Speaker 1: Today we're going to be taking a look at the Gustafson RV Double Dome Pancake Light, Part Number 277-000340.This LED Pancake Light is a great upgrade, or replacement, for your RV, camper, or enclosed trailer. It features two clear lenses with a textured pattern. This is going to help disperse the light throughout your camper. It features two modes. We have a single light and a double light.With the lenses removed, you can see the 18 LED's. There's nine on each side.

The overall dimensions are four and three quarters of an inch long, 11 and a half inches wide, and one and one quarter of an inch deep. Customers on our side are using these to upgrade from the old incandescent lights to LED's. LED's are more efficient. They last longer. And there are no bulbs to replace.Now that we all know the features I'll go ahead and show you how to get it installed.

We'll be replacing our old light. Let's go ahead and start. We'll want to first make sure the electric is off, and then we can take off our lens covers. We'll pull back and then take them out. We'll want to remove our old hardware.

We'll also want to save those because our new one doesn't come with hardware.With our hardware removed, let's go ahead and pull it down and reveal our wiring. As you can see, the wiring uses wire nuts, so we're going to go ahead and reuse those. We'll just twist them off.Now we can grab our new Pancake Light. It's a good idea to have the lens covers removed before you connect the wiring because it can be a little bit difficult to take them off once it's wired up. The way you take them off is you grab the two sides and squeeze, just like that.Now we can bring in our wire nuts and reconnect our wiring.

Our black is going to be our ground, so we'll connect it to our white. We'll just line up the wires and twist on our wire nut. Then we'll repeat the same process with our power wire, which is our red.Before we install our light it's a good idea to check our power. I've gone ahead and turn it back on, now let's check our light. I'd say it works good.Now that will know everything's working, let's go ahead and button up our install. Push our wiring back up into our ceiling. Want to get it lined up. With our hardware in place, let's go ahead and replace our lens covers. You want to be sure to slide in the sides first and then squeeze it to pop it in place. Looks like we're all set.And that's going to complete our look at the Gustafson RV Double Dome Pancake Light, Part Number 277-000340.

Info for this part was:

Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.