Glacier Multi-Arm Adjusters Review

content loading

Customers compare pw103 to these similar products




Products Featured in this Video




Review of the Glacier Multi Arm Adjusters


Today we're going to take a look at the Glacier Multi-Arm Rubber Adjuster for snow chains, 15 to 18 inch wheel size. Part number PW105. It's a quick an easy fitting with the simple hook design. The Multi-Arm, meaning all six of the arms will give us a nice even tension around our snow chain. This is recommended to use with a Glacier cable Twist-Link V-Bar or Square Length chains. We have a total of two adjusters in our kit, one for each wheel. Here it is folded up, so we have a simple compact design when in storage or not in use. Then we simply open it up, spread out the arms on the round link and just that quickly we're ready to install it onto our cable or snow chain.

One of the great features about this the design of tensioner is that if one of our tensioner breaks, we still have the other five holding tight versus a single tensioner design that if the tensioner breaks you lose all of your tension all the way around. Quick tech tip when installing your tensioner. To make sure that the hook faces away from the tire so it will go around the cable or chain and face away from the tire so that the hook itself doesn't dig into the side wall of your tire. There you have it for part number PW105. .


Questions and Comments about this Video

Info for these parts were:

Video by:
Andrew K
Video by:
Chris R
Test Fit:
Nicholas E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.