The Low-Down on the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers-325-GH-323 Video

I checked with Gen Y and they told me that the length of the Replacement Hitch Pin Clips part #GY69FR is 2-3/4 inch and the diameter is 1/8 inch.

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

Hey Meighan, we do have a version of the Saris Superclamp that is rated for use behind a motorhome with the part #SAR44VR which it sounds like is what you are looking for. This rack is rated for 60 lbs per bike and only fits 2 inch hitches.

There are two hitch pin holes on the shank of the Gen-Y Adjustable 2-Ball Mount part #325-GH-524 to allow for compatibility with different receivers. Trucks typically use the one closest to the vertical portion and SUVs typically use the one furthest…

Extending out the safety chains is definitely something that has to be done with the Swagman Original 4 Bike Towing Rack S64675. The RoadMaster 8" Safety Cable Extensions #RM-910648-8 will help get the job done but I do recommend picking up…

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

The Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers #D210 does not come in any other drop. If you need more than the 2 inch drop, then your only option to also have the bike rack receiver is to use the Gen-Y…

I have a solution for you, but it doesn't appear that we have that exact replacement lens or light. With that being said, I think I can get you close with the Replacement light #277-000344. If that doesn't match your lights one other option…

We have exactly what you are looking for! Gen-Y has a stacked receiver design that is built around heavy-duty applications like what you are looking to do. For a 10" rise that will match up with your 3,500 lb pintle hook trailer we have part…

We have a great hitch that will work well for you. The Gen-Y Adjustable 2-Ball Mount w/Stacked Receivers, Item #325-GH-315, is one of our top-end hitches that is heavy duty and very adjustable. It has a maximum towing weight capacity of 10,000-lbs…

I took a look at all of our hitch bike racks rated to carry e-bikes and are motorhome compatible. We only have one rack that weighs under 40 lbs, secures the bikes by the wheels, and is motorhome compatible. It is the rack you mentioned in your…

To install your Reese Pod brake controller in your 2018 Ford Explorer will require the install harness part #3035-P which is a confirmed fit. If you check out the 9:55 mark of the install video I attached to this page you'll see where to find the…