All About the Curt Anti-Rattle Hitch Clamp for 2-1/2" Hitches Video

We've had customers have the U-bolt of the Roadmaster Quiet Hitch for 2-1/2" Trailer Hitches #RM-062 facing up and down and it has worked just fine. I would probably use it in the configuration you referenced. That way the #RM-062 isn't…

What we have found is the integrated trailer brake controllers on trucks can be very temperamental when used with electric over hydraulic brakes. I do recommend using a HydraStar Electric Over Hydraulic Actuator Adapter Module #HBA-CAM with your…

I have to go off the GM dealership recommendation. If they are saying you need the Hydrastar #HBA-CAM or Dexter #DX35FR adapter module for your factory brake controller to work with your electric over hydraulic brake actuator, then I can't really…

Integrated brake controllers are notorious for not always working well with electric over hydraulic actuators. Sometimes it's just easiest to replace the controller with aftermarket. What actuator does your trailer have? If it is a Hydrastar like…

Since you have a hitch with a 2-1/2 inch opening you can still use the hitch bolt that came with your Yakima rack designed for 2 inch hitches. You will need to use a hitch reducer for the hitch so that it will have a 2 inch opening. For that I would…

Your 2021 Forest River Rockwood Freedom 2318G Camper should have came with 2 propane tanks and a regulator like the Automatic Changeover RV LP Gas Regulator #37207-30395. This will allow you to attach to both propane tanks and use propane from which…

The Blue Ox hitch lock part #BX88212 that you referenced is made here in the USA!

Hey Mike, to use the Yakima StageTwo Bike Rack for 4 Bikes #Y75AR with a 2-1/2 inch hitch will require an adapter like the #e53YR. This is an extension and not a sleeve adapter for the hitch but this will allow you to use the hitch pin setup of the…

The best way to add a 7-way trailer connector onto the back of your 2017 Lexus RX 450h that already had a 4-way connector is with #ETBC7. This gives you all the components needed for a fully functioning 7-way and comes with the instructions, which…

The Curt Rebellion XD like part #C45949-2516 and the Gen-Y Torsion 2-Ball Mount #325-GH-1124 are the two most advanced cushioned ball mounts. As far as cushioning goes the Gen-Y is the winner as it has a design that allows for more cushioning…

If you are looking for a threaded hitch pin for a Yakima bike rack most likely what you need is the part #Y8890200. The Swagman threaded pin #P5901 would not fit a Yakima bike rack.

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…