Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount Spec Review Video

You could certainly use the Convert-A-Ball Ball Mount for 2" Hitches #AMSC4 together with the Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047. Whether it is pointless or not is dependent on what you are doing or experiencing right…

The Curt RockerBall Shock Absorbing 2" Hitch Ball part #C40047 will not work with a weight distribution system because the flange that gets wedged between the platform and base that stops the unit from rotating will not fit over the shank on a…

Though the Convert-A-Ball #AMSC2 cushioned ball mount and the Curt RockerBall, like the #C40047, are very nice products and will help with chucking and vibrations, they cannot be used together. You are correct in that they will help with the same…

The Curt RockerBalls like the part #C40047 do not require the use of a Curt ball mount or trailer hitch. They can be used in essentially any brand of ball mount or hitch.

I do have an option for you but there would be no way to attach a sway control mount to the Gen-Y Glyder Shock Absorbing Ball Mount part #325-GH-12001. Instead, I recommend the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount part #CAB-UM which…

Ok, let's start with the Curt RockerBall, which is actually not going to be compatible with a cushioned ball mount, which the Convert-A-Ball is - for stability, the RockerBall can only be used with a standard ball mount. You would normally take…

1. Normally I'd say that your 2016 Kia Sedona would be just fine as long as the pop up has brakes, but since your towing capacity without brakes is only 1,000 lbs it would be a good idea to install one. As far as the warranty is concerned you are…

While there is no way to attach an anti sway system to the Glyder for Gen-Y part #325-GH-12005. I do have a solution for you. You can use the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount part #CAB-UM which isn't as clean looking of a…

Trailer coupler height varies slightly on every trailer and every vehicle has a slightly different trailer hitch receiver height based on the hitch manufacturer. Most trailers have a coupler height between 15 and 19 inches, but there are exceptions…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 6" Drop - 7K #325-GH-12005 that you referenced would be a great solution for your trailer. It's adjustable in drop so you'd be able to get it exactly where you need it and…

Yes, you can use either piece of the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount, #CAB-UM, in the rise of drop position to find the configuration that is best for you. I have included a link to a video review of this ball mount for you.