bing tracking image

CIPA Comp Rearview Boat Mirror Review

content loading

Customers compare CM01875 to these similar products




Products Featured in this Video



Review of the CIPA Comp Rearview Boat Mirror


What's up everybody it's AJ with etrailer.com today we're going to be checking out this Seba clamp on rear view mirror. So that clamps onto your windshield frame right here and be really easy to take on and put off whenever you need it. That way you can see behind you. If there are skiers behind you or you're pulling people in tubes, you have to keep looking back all the time. You can just look up here and it's far easier. Let's check it out.

Taking a closer look at the mirror. It's going to be seven inches tall by 14 inches wide and it's convex style. So it's going to have a lot more field of view than other mirrors. I mean, the thing is pretty big if you're just looking at it and you can see quite a bit behind you behind that boat the mirror is also adjustable. So we have a hand knob down here that you can loosen And you can move it down and up wherever you want it let's tighten it back up.

You can also adjust it side to side like that. And then This also tilts, but that goes by a bolt. So it's a little stiff right now But I can show you kind of just tilting it up and down that way The clamp-on design works really well. You see, it's moving a little bit, but not much. It's on there pretty sturdy so let me loosen this and show you exactly how it works.

It can fit on windshield frames up to from 3/8 of width to one 1 inch of a width. You see it that's how it comes off of there. This part separates it has padding in there. So it's not going to damage the windshield frame as you put it into place. And then just to put it there, to slide it over, just like that tying it down, very simple to put on or take off whenever you need it.

The outside of the mirror is going to be made of an ABS plastic. The inside is going to be safety glass. So you don't have to worry about it, it is less likely to shatter or causing issues like that. This piece here is going to be a black powder coat aluminum. So you don't have to worry about it rusting or corroding when you're out on the water Overall I think it's gonna be a great addition to your boat. It does make it easier as the driver to look back just look up here in the corner and see behind you without having to turn around the whole time. And the thing is that I like is that its not permanently installed. You don't have to to drill any holes or about where you're going to leave it forever on your boat. Easily attaches with these knobs up here and can easily come off. If you don't need it or decide you just want to move it to a different place. Well, I think that does it. That's you're hanging out and hanging this out and I hope this helps.


Questions and Comments about this Video

Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Jacob T
Video Edited:
Jacob T
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.