Buyers Products Forged D-Ring With 4-Hole Integral Mounting Bracket Review and Installation Video

Hi Derrick, The Trailer Hitch Receiver Mounted Forged Tow Eye #TR63045 shank is 1-7/8" x 1-15/16" with rounded corners, which would explain the amount of play you've been experiencing. We have a few other options in this weight class…

The Combination LED Trailer Tail Light - Submersible - 7 Function - 14 Diodes - Driver Side #STL9RGB and #STL8RGB for the passenger side will work well for you. When installing the light you can ground your current wire to the mounting hardware post…

The D in 205/75D15 represents that the tire has a bias ply construction whereas the R in 205/75R15 represents that the tire has a radial ply construction. The difference between a bias and radial ply is in regard to the directions of the cords. In…

The mounting holes on the Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket #337B40MP you were looking at are 5" apart on center as shown in the included diagram. I included a video of Adam installing the #337B40MP on…

The 205/75-15 Tire and Wheel Combo, #AM32395, is 8.1 inches wide and 27.3 inches tall. An F78-14 tire and wheel will be about the same width but it will be 1 inch shorter. I have included a link to a tire size FAQ article that should help.

The inner measurement of the Brophy D-Ring Tie Down Anchor item #DR01 is 2 1/4". I have attached a diagram with the measurement.

The Buyers Products 5/8" Forged D-Ring #337B40MP has a working load limit of 6,130 pounds. The break strength data was not provided. Usually the working load limit is a third of the break strength but again the exact figure is not provided. The…

I can absolutely help you and make a recommendation. The floor of your Big Tex 70 car trailer is an 1/8 diamond steel plate. The 1/8 plate will be fine for a tie down point for anything but a car. You need a bracket not to fasten something down tight…

First, the DOT date code on a tire is 4 numbers. The first 2 are the week and the last 2 are the year. So for example if it was 2314 that means that tire was made in the 23rd week of 2014. There isn't a difference between a tire sitting on the…

According to my contact at Brophy, their #RR05 Trailer D-Ring Tie Down has a working load limit of 1600-lbs and a break strength of 5,000-lbs. (Working Load Limit or WLL is the maximum burden that should be put on the device in daily use.) This makes…

You are correct. You will want to use the backing plate to sandwich the boards and provide the most secure connection when installing the Brophy Swiveling D-Ring Anchors #RR6K-4 . You can mount these in a recessed hole created by a router or punch…

The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with the…