Review of the Blue Ox Adjustable Ball Mount with Clamshell for 2-1/2" Hitch Video

I took a measurement of the B&W Tow & Stow 3-Ball Mount #BWTS20049C and found from the base to the bottom of the receiver it measured about 8-1/4 inches while the overall vertical measurement was about 11 inches. I have made a photo for you…

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install…

I would be happy to help you find the correct weight distribution system for towing your Malibu 25 LSV on a tri axle trailer with your 2020 Ford Expedition Max with the HD tow package, but you will need to confirm a few things on your trailer to…

The Blue Ox Adjustable Ball Mount #BLU89XR has a distance of 4-11/16" from the center of the furthest receiver hitch pin hole to the weld on the tube. The shorter hole is 3-7/16" from the center of the receiver hitch pin hole to the weld on…

The note that says, "Designed for flat towing only. Do not use to tow a trailer" means it is only rated to dinghy tow a vehicle with four wheels down behind a motorhome. So it cannot be used on your truck to tow a trailer as it is not rated…

In a word, no, the warranty of your 2020 Ram 1500 will not be voided with the use of the Timbren Rear Suspension Enhancement System #TDRTT1500 or #TDR1500DQ. You are protected by what is called the Federal Magnuson-Moss Warranty Act. This act says if…

The heaviest cushioned ball mounts we currently offer are 18,000 pounds gross towing weight. The tongue weight is 2,000 pounds. They are the Convert-A-Ball #AMSCV-6, #AMSCV-2 and #AMSCV-4. The most popular of the 3 we currently offer is part…

I have a solution for you, and while most Fastway products are made in the U.S.A. it looks like the steel #FA49-00-5925 was not. Instead, I recommend using the aluminum Flash E Series HD Adjustable 2-Ball Mount #FA42-00-2925 which has a similar…

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

The 4-Pole, Round Pin Trailer Wiring Connector #PK11402 is a standard size used in North America. Do understand that while there is a standard wiring pattern it is possible to be wired differently which could cause issues.

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…