Air Lift LoadLifter 5000 Air Helper Springs Review

content loading



Customers compare AL57140 to these similar products




Products Featured in this Video



Review of the Air Lift LoadLifter 5000 Air Helper Springs


Speaker 1: Today we're gonna be taking a look at Air Lift's Load Lifter 5000 air helper springs for the front axle. Verify with our fit guide the most appropriate ones to fit your vehicle.This is what our airbags are gonna look like when they're installed. You get one for both the driver side and passenger side. It's going to mount between the frame of your vehicle, and the front suspension here on your front axle.Here you can see our suspension with no air helper springs going over various terrains.And now you can see our suspension with our airbags installed, and now you'll notice that it's much more stable. There's not as much oscillation between our suspension and our frame, and overall, it's just a smoother ride. These air springs are gonna provide you with up to 5000 pounds of load leveling support.

This will reduce strain on your suspension, and both improve safety and ride quality. This allows you to level out an uneven load, so if it's tilting to one side or to the front or the rear, you can adjust this with these air helper springs.One of the benefits of having a level ride is that it improves steering and braking performance, because it keeps your suspension geometry in correct plane. It's also gonna decrease tire wear by making sure that the alignment is correct. This helps keep your tires level and going down the road straight, so they don't scrub or rub on the road. You can also use it to help maintain proper headlight aiming, because if you're loaded too far in the rear, the front's gonna lift up, and your headlights are gonna point up towards the sky.

If you're loaded too much in the front, it's gonna sag down the front, aiming them towards the ground. This way you can maintain that levelness, and return those straight and have a nice, safe ride at night.The airbags themselves have Air Lift's exclusive upper and lower roll plates. These are constructed of steel and will help increase the load capacity of the air springs, protecting the springs from damage and extending the life of the air spring suspension. The airbags are constructed of two-ply fabric reinforced rubber. And the end caps are made of a high-strength nylon, which is lighter, stronger and more corrosion resistant than steel.

You can adjust the air pressure between five and 100 PSI to get the perfect level ride. It comes with all the hardware you'll need to get it installed, including the airlines and fittings.You'll receive two manual air valves, so you can adjust both the right and left side, and our customer here has opted to install airbags for both the front and the rear, for complete suspension, load leveling control.And that completes our look at Air Lift's Load Lifter 5000 air helper springs for the front axle.


Questions and Comments about this Video

add comment

Info for this part was:

Video Edited:
Jacob T
Video Edited:
Dustin K
Installed by:
Kathleen M
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.