Today on our 2013 Honda Pilot Ill be showing you how to install and operate the Yakima stickup two bike carrier, part number Y02420. To install the carrier slide the shank into the opening of the hitch tube and align the threaded pin hole. Thread the anti-rattle bolt through the threaded pin hole, tighten with a wrench and secure with a security pin. Now lets go over some clearance measurements to see how the vehicle and the bike carrier fit together. There is about 19 inches of ground clearance. The closest part of the vehicle tot eh closest part of the carrier is about 7 inches.
Weve added about 12 inches to the overall length of the vehicle. To access the cargo area pull the red knob located at the base of the carrier and pull the carrier towards you. This will allow you to have access to your cargo door. To load the bike, first put the mast in its upright position, the frame hooks to the top of the mast, and undo the cradle strap. Sit the bike in the tire cradles, adjust the frame hook against the frame and secure it with the cradle strap.
That concludes or test fit today of the Yakima stickup two bike carrier, part number Y02420, on our 2013 Honda Pilot.