Today on our 2012 Chevrolet Impala we'll be test fitting the Yakima QuickBack 2 trunk-mounted carrier, part number Y02621. Before we begin our test fit we'll first need to check out the instructions or the Yakima fit guide to determine the placement of this on our vehicle. We'll go ahead and set the carrier onto the vehicle. You may need to adjust it by undoing the red knob located directly behind the cradle arms. We'll then put the top hooks to the top part of the trunk, the side hooks to the side part of the trunk, next to the taillights and the bottom hooks at the bottom part of the trunk. We'll then tighten down the straps to secure the carrier to the vehicle.
We can then secure the excess strap. Once the carrier is secured to the vehicle and the excess strap is secured, we're ready to load our bike. We'll then loosen up the red knob located on the right side of the carrier to loosen up the cradle arms. Note that you will need to make sure that your cradle arms are level or slightly angled up to insure the correct fit for the bike. We'll undo the cradle straps, set the bike into the frame cradles and secure it with the straps.
That completes today's test fit for the Yakima QuickBack 2 trunk-mounted carrier, part number Y02621 on our 2012 Chevrolet Impala. .