Products Featured in this Video
Today on our 2006 Acura RSX we'll be installing the Yakima roof rack system, part numbers Y00408, Y00683 and Y00124. With our load bars already set up, we're ready to go ahead and install them on the vehicle. We'll first open up the doors, and then we can set our load bar onto the roof line. Referring to our fit guide and instructions, we'll measure from the front edge of the windshield molding to the front edge of the foot pack, totaling 5 inches. Now that we have our load bar measured out, we can go ahead and tighten it down. Using the thumb wheel, we'll make the necessary adjustments to secure the foot pack firmly to the roof line.
We're ready to go ahead and install the rear load bar. Measuring from center of the front load bar to the center of the rear load bar, there is a total of 14 inches. Then, once again, we'll use the thumb wheel to make our necessary adjustments and then clamp it down. With both load bars set up and secured, we're ready to hit the road. That does it for our test fit of the Yakima roof rack system, part numbers Y00408, Y00683 and Y00124 on our 2005 Acura RSX,.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gio
9/17/2021
how much weight would this able to withstand