UWS Aluminum Cargo Carrier Review - 2012 Toyota Sequoia

content loading




Review of the UWS Aluminum Cargo Carrier on a 2012 Toyota Sequoia


Today on our 2012 Toyota Sequoia we'll be test fitting the 23 by 51 Aluminum cargo carrier for two-inch hitches, part number UWS03511. Now to begin our test fit we'll simply slide the cargo carrier shank into the hitch, line up the hitch pinhole and install our hitch pin and that will secure our carrier to the vehicle. Now we'll go ahead and give you a few measurements. From the closest point of the cargo carrier to the bumper of the vehicle is 4-1/2 inches and this cargo carrier will add an additional 27-1/4 inches to the overall vehicle length. Now the exhaust exits the passenger rear on this vehicle and is approximately six inches from the cargo carrier platform. It also appears to be about two inches lower than the platform so there will be little to no heat transfer while you are driving down the road and that completes our test fit of the 23 by 51 Aluminum cargo carrier for two-inch hitches, part number UWS03511 on our 2012 Toyota Sequoia..


Questions and Comments about this Video

add comment