Trailer Wiring Harness Installation - 2010 Honda Pilot Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Brake controllers are not vehicle specific, you can choose virtually any controller for your Pilot and it would work just fine for you. This being said, I would recommend the Tekonsha Prodigy P2, part #90885. This controller is very easy to set up…

The "20327-02" light base is a rectangular shaped clearance light measuring 4" long x 2" wide which was made by Optronics. The light has since been discontinued along with the replacement lens but we have had customers use part…

In order to tow a trailer with your 2017 Toyota Rav4, you will need a trailer hitch receiver, wiring harness, and ball mount with hitch ball. For this, I recommend using the etrailer Trailer Hitch Receiver part #e98864 as this hitch receiver has the…

The Curt Double Lock #C60712 is designed to fit various GM trucks so we need to look for a different solution for your 2023 Ram 3500. Normally the chassis version of a pickup has a bit of a different frame design so for your application I recommend…

If you do not have the factory tow package on your vehicle, or you only want to install a 4-Way connector, you can use the T-One Connector with Upgraded Circuit Protected ModuLite, #118491, to provide a 4-Way connector at the rear of your vehicle.…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Thank you for the pictures! It looks like you found the connector for the pigtail with the 4-Way from the T-One #118778 on your 2019 Honda Ridgeline. The reason that you are having trouble finding the connector that the black box plugs into is…

You did quite a bit of troubleshooting and homework on this so I commend you for that! Since it's not the relays, the fuses, or the trailer wiring that basically leaves the converter box of the wiring kit. Which you can test that with a circuit…

Curt still does offer a wiring harness for your 2011 Honda Pilot but it's a 4-pole connector, part #C56365. We do have a solution for you with the 7-Way Tekonsha kit part #118253 and the 7-Way bracket #PK12711U (sold separately).

The final authority on whether or not a vehicle has the tow package would be a Honda dealer. If you give them your VIN they will be able to tell you for sure. That being said, we have found that either kit will fit your 2011 Honda Pilot.

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…