bing tracking image

Fifth Wheel Wiring Harness Installation - 2014 GMC Sierra 2500

content loading

Customers compare 54701-003 to these similar products




Products Featured in this Video



Installatino of a Fifth Wheel Wiring Harness on a 2014 GMC Sierra 2500


Today on our 2014 GMC Sierra, we'll be installing the Bargman fifth wheel Gooseneck 90-degree wiring harness with seven-pole plug, part number 54701-003. We'll go ahead and choose a location to mount our seven-way plug. I know we need to put a pilot hole through the bed. We're going to make sure on the back side that there's nothing that could be damaged. Once we have our quarter-inch pilot hole drilled, we'll come back with a two-inch hole saw. Now we'll take our end of the wiring harness that has two plugs on it and feed it to the hole we just drilled. Now that we have our wires fed down through the two-inch hole, we'll go ahead and take a small drill bit and put a pilot hole into each of the four mounting locations on the plug. Once we have a pilot hole on each of the four locations, we'll go ahead and put the self-tapping screws in place securing the plug to the bed of the truck. Now we'll go and take the end of our wire and route it over into the back of our factory seven-way plug. Now that we have our wires routed over to the backside of the factory seven way, we'll need to unplug the factory seven-way plug. To do this, we'll remove the small gray locking tab.

Gently push in on the tab on the side of the plug and pull outward. But before making our connections, it's a good idea to add a little dielectric grease. The dielectric grease is part number 11755. Now we'll go ahead and make our two connections. We'll connect one end of the wiring harness to the factory side of the wiring harness, and the other end we'll plug in to the backside of the seven-way plug. Once you have the wiring harness plugged in to the backside of the seven-way plug, go ahead and reinsert the gray locking tab. We'll go ahead and use a few zip ties to secure up any excess wire.

We'll then take a pair of snips and cut off any excess zip tie. That's all there is to it to installing the Bargman fifth wheel Gooseneck 90-degree wiring harness, part number 54701-003 on our 2014 GMC Sierra. .


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Michael B
Video by:
Michael B
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.