Installation: Adapter 4-Pole to 7-Pole and 4-Pole on a 2013 Ford F-150 Video

For your 2016 Ford F-150 if your trailer does not have brakes all you would need is the part #37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the #37185 and the install harness part #22292. If you…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Your 2013 Ford F-150 must have come with the factory 4-Way connector. Since the harness for that connector uses a square plug and not the round plug, a simple plug and play 7-Way is not available. You will have to partially hardwire in a 7-Way using…

Since your boat trailer has a 7-way on it currently and has surge brakes what you would want is the 4-way to 7-way adapter part #37185 Kevin. Your 4-way will plug into this and all of the taillight functions of the 7-way will be active. If you also…

Hey Josh, If your 2017 Ford Escape has a tow package then you'll see a 7-pin round connector around the trailer hitch to plug the Hopkins #30955 in. If you don't have this package/connector then you'll need the Tekonsha T-One Vehicle…

Personally, I'm a much bigger fan of Pollak than I am of Hopkins. In my experience, I've had fewer issues with 7-way plug fitting loosely with Pollak brand 7-ways and Pollak is generally the "go-to" brand for most OEM truck…

We do have a solution for you, though the Reese Trailer Connector Adapter #78118 will not work for you. Instead I recommend the Hopkins Endurance Quick-Install Trailer Connector Adapter #HM47200 which will plug into your truck's 4-way and allow…

The #HM47200 would indeed adapt your existing 4 pole to a 7-way blade-style trailer connector. In that respect, it would work just fine. However, I typically recommend going with the #37185 instead, as the adapter also offers a 4-pole connector. If…

The 7-Way connector #HM40975 is designed as a replacement for an OEM 7-Way on a 2006 Ford F-150. What you will need is #37185 and do a little hardwiring. What you will do is follow the factory 4-Way forward on the vehicle where it plugs into another…

The wires are ran to the rear of your 2018 Ford F-150 that you'll need to wire up a 7-way but they stop at a connector that's in the frame rail of the truck. So the adapter you need is the part #37185 which your 4-way will plug into and then…

The only trailer wiring options we have for your 2002 Toyota Tundra is 4-ways like the part #118378 which you could convert with a 7-way adapter like the part #37185 which also happens to have a 4-way on the side of it like you wanted.

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame #24792, feature a square tube design, while the Class III hitches like the…