bing tracking image

Trailer Wiring Harness Installation - 1998 Chevrolet Suburban

content loading

How to Install a Trailer Wiring Harness on a 1998 Chevrolet Suburban

All right. Today on this 1998 Chevrolet Suburban, we're going to install Part Number 118319 from Tow Ready. All right. First thing we'll do is go find the connection point that's located behind the bumper. The connection point will be just left of center if looking from behind the vehicle. We see our connector.

Lastly, we have to loosen up, so push up on it and pull it apart. Now, we'll take our T connector, and we'll go ahead and push it back between the tube pass. The factory wiring will fit on each side of the T connector. We'll plug it back together until they click then we'll take the whole assembly, push it back into place, back in the original location using bridge or push pin that'll holds it in the frame. All right.

Now, we'll take a white wire, with a ring terminal, we will go ahead and ground that to the frame. We'll take the provided self-tapping screw and we'll go ahead and attach it to the frame cross member, and that will finish it for our install of Part Number 118319 from Tow Ready on this 1998 Chevrolet Suburban.