Menu Icon
fall hauling headquarters

EcoHitch Hidden Trailer Hitch Installation - 2018 Toyota Highlander

content loading



Customers compare 306-X7250 to these similar products




Products Featured in this Video



How to Install the EcoHitch Hidden Trailer Hitch on a 2018 Toyota Highlander


Speaker 1: Today, on our 2018 Toyota Highlander, we're going to be installing eco hitches. Class three, two inch, trailer hitch receiver. Part number 306-X7250. This is what your hitch is going to look like when it's installed. The cross tube is going to be hidden behind the bumper, so you'll really only be able to see the receiver tube here at the end. This is going to be a class three, two inch by two inch receiver, so it's going to be great for all of your towing needs, whether it be for trailers, for bike racks, or cargo carriers.

It uses a five eighths hitch pinning clip. One is not included, but you can pick one up here at etrailer.com with part number PC3. It features a vertical, plate style safety chain loop. The larger opening will accommodate most safety chain sizes.It features a 500 pound tongue weight, which is the force going down on top of the receiver, and a 5,000 pound gross towing capacity, and that's how much it can pull behind it. You do want to make sure that you check your vehicle's owner's manual to ensure you're not going to exceed its towing capacity.

And now I've got the measurements for you to assist when deciding on accessories. From the ground to the top inside edge of the receiver tube, it measures about seventeen inches, and from the center of the hitch pin hole to the edge of the rear bumper, it measures about three inches.We'll begin our installation at the back of the vehicle underneath, and to make it easier, we've gone ahead and removed our spare tire. We're going to remove the plastic panels located at the bottom on both the driver and passenger side. On our passenger side here, we're going to remove these bolts with a ten millimeter socket, and any plastic tabs with a flat plated screwdriver or trim panel removal tool. And there's one more tucked up here by your muffler.

Then you can pull your panels to the side, drop it down, and set it aside. Then on your driver's side, you're going to remove the three bolts located on the bottom and the two plastic nuts located on the side. Then again, use your flat plated screwdriver or trim panel removal tool to remove the two push pins located on the bottom side.Remove the push pins from the small plastic O brackets located on both the driver and passenger side. We'll then be trimming off this tab, this tab, and this tab here. You can do that with a cut off wheel, a razor knife, or a pair of tin snips.

Remove both of the exhaust hanger bolts located here so we can lower it out of the way. Use a twelve millimeter socket to remove those. Then remove the two tow inaudible 00:02:56 bolts here with a seventeen millimeter socket and set it to the side. Next, use a flat plated screwdriver to remove the plastic caps from your frame rail. We're on the driver's side here. We need to remove both the lower ones and both on the side. On your passenger's side, you only need to remove the side ones.Now, with an extra set of hands, we'll lift our hitch into place, lining up the holes in the bottom of our hitch to the bottom of the frame. We'll then take the fine thread bolts in our kit, place on a lock washer followed by two flat washers, and thread it into the weld nut on the bottom of the frame. Once you've got one started on each side, it should hold itself in place making it easier to install the rest of your hardware. Install your other bottom bolts. Now, tighten down your bolts with a nineteen millimeter socket. Then, torque your hardware to the specifications of your instructions. Next, we put on our side plates. Your driver's side side plate will be the shorter of the two when you hold them up side by side. Line up your driver's side plate with the weld nuts on the side of your frame. Then, we'll use the fine thread bolts, but this time, only with just a lock washer and a flat washer and thread that into each of the weld nuts on the side.Then, take one of the inaudible 00:04:40 bolts, place on a flat washer, slide it through the plate and the hitch, and on the back side, slide on a flat washer followed by a lock washer and, of course, the right nut. Once they're all in, tighten them down with a nineteen millimeter socket and wrench, and repeat the same process on the other side. Then, torque all of your hardware using nineteen millimeter sockets and wrenches to the specifications in your instructions. You can now reinstall your exhaust. You do have the option to reinstall your side panels or just leave them off. If you reinstall them, you will have to trim your panel to fit around your hitch.If you removed your spare tire to get that extra room, go ahead and put that up now. Once your spare tire is back up, you're ready to hook up your trailer and hit the road. And that completes our installation of eco engines class three two inch trailer hitch receiver on our 2018 Toyota Highlander.


Questions and Comments about this Video

add comment


Info for this part was:

Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.