Beginner’s Guide to Installing the Curt Trailer Hitch Receiver on a 2004 Dodge Ram Pickup Video

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

Yes, the Curt Trailer Hitch Receiver #C15809 will fit your 2003 Dodge Ram 3500. This receiver is capable of fitting with the factory receiver still installed or no factory receiver present, That is why it looks different from your factory receiver in…

The Class V hitch we have for your 2004 Dodge Ram 2500 with the best ground clearance is the Curt hitch part #C15809. It doesn't tuck right under the rear bumper like what you can see in the attached picture but it does sit the highest.

The factory trailer hitches on the 2006 Dodge Ram 2500s are welded on. You can add a Class V Curt hitch, #C15409 for a 2 inch receiver or #C15809 for a 2-1/2 inch receiver, and either will install beneath the factory hitch. I have linked videos…

We have everything you need to install a brake controller on your 2004 Dodge Ram. Since your truck does not have any factory trailer wiring, we will want to install a trailer connector first because the brake controller will tie into the trailer…

On my 2004 Dodge Ram (which would be the same as your 2003) the factory trailer connector plug split off from a larger wiring harness on the inboard side of the drivers side frame rail near the rear bumper. There should be a rectangular connector…

According to our records, the cold brake switch wire on a 2004 Dodge Ram 2500 should be a white/tan wire. Wire color is not always universal, so if you do not find a white/tan wire, you can use a wire tester like part #PTW2993 to determine wire…

Normally you can find the brake light switch under the dashboard at the top of the brake pedal. There could be a number of wires attached to the switch so you can use a tester like part #PTW2993 to test the wires. Since the auto manufacturers can use…

The Tekonsha Plug-In Wiring Adapter, part #3020-P, you have referenced is for connecting a Tekonsha brake controller to the brake controller port located in the cab of your vehicle. It will be used if you have the factory 4-Way or the factory 7-Way…

The port you describe does not seem like what you need. You are going to be looking up under the dash for the 4 pin connector wiring harness. It is usually blue but this is not always the case, it can sometimes be gray. On your 2004 Dodge Ram it will…

You would want to measure the distance of the opening of the vent. The Vent Cover #BV0554-03 that you referenced fits 14-1/4 by 14-1/4 inch openings. Nearly all roof vents are 14-1/4 inch by 14-1/4 inch. You probably have one of the styles that we…

Yes, it is very possible to install/fit a 7-way trailer connector on a 2004 Dodge Ram 1500. I first recommend looking under the vehicle for a square ten pin connector. This (if present) will be located behind the rear bumper near the spare tire and…