Products Featured in this Video
Today on this 2007 Toyota Tundra were going to install part number B1618101 from Best Stop. Were going to start off our Tonneau cover all folded up as it came out of the packaging. Well go head and sit it on the rails of the bed and well pull off the protective coating on the pads underneath. Well go ahead and take it and square it up on the bed. Make sure its square in the corners and then well go ahead and unfold the Tonneau cover all the way in the back. Then well start at the back end and make sure its even front to rear.
Well go ahead and fold it all back up and then we can go ahead and attach the built in clamps to the bed rails. Now these latches will slide down and then slide over to the bed rail. You take the handle to twist up or down as necessary. Then lift the handle to lock it into position. Theres one on each side of the truck.
Well start off on the drivers side and then move over to the passenger side and repeat the same process. Now with our front two clamps attached well go ahead and fold the Tonneau cover and show you how it attaches to the rear. It works just the same as the front. You just unfold it and clamp it into place. With that your Tonneau cover is fully installed.
When you need to get into the bed of the truck simply undo the last two clamps and unfold it as needed. Thatll finish it for our install of part number B1618101 from Best Stop on our 2007 Toyota Tundra.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
