Setting up the Timbren Active Off-Road Bumpstops on a 2013 Toyota Tacoma Video

Due to the design of the Timbren kit part #TABSOSR it would potentially fill with water if they were submerged. This eventually could lead to rusting out the base and even one guy remarked that when filled with water there is a "fart sound"…

The Timbren Active Off-Road Bumpstops #TABSOSR referenced in your question feature an assembled height of 4-5/8 inches. I have attached a short video review on this kit along with the written installation instructions that you can check out as well.

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

Hi Dana; the Timbren #TFR250SDJ are 6-7/8" tall including the mounting bracket. I see you went ahead and ordered the #TFRTT350J instead. Just a heads up, this is the severe service kit so it is designed for a constant heavy load like a slide-in…

The Timbren Rear Suspension Enhancement System #TTORTUN4 is a great SES that fits your 2018 Toyota Tundra. The Timbren line of SES is really popular and there are several models available. The #TTORTUN4 features heavy duty rubber springs with a 6,000…

The Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs #TABSTRFK have bump stops and mounts that are 5-1/2 inches tall overall and u-bolts that are 8-1/4 inches long and 3-3/4 inches on center. I've attached a photo to assist. These…

There are six different Timbren kits for suspension enhancement that all fit your 2018 Toyota Tacoma. Four are for the rear and two are for the front. Of the front two, part #TTOFTUN4 is designed for adding support when you put a snow plow on the…

To add a 1" spacer #A25723-90AH00 to the Timbren Active Off-Road Bumpstops #TABSOSR you were looking at for your 2014 Toyota Tundra you will need to purchase two grade 5 or 8 3/8" x 2-1/2" F/T UNC bolts from your local hardware store.…

For your 2018 Toyota Tundra the suspension enhancement I recommend is the Timbren kit part #TABSOSR because this kit installs easily, gives you the suspension support you need to greatly reduce the sag, and because it doesn't require monitoring…

Yes, the Timbren Rear Suspension Enhancement System #TGMRCK35S can still be used on your 2007 Chevy Silverado even though its been lifted. You'll just need to install a spacer to get the gap between the Timbren and the axle around 1" to…

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.

There is an interesting amount of Timbren kits that fit your 2022 Toyota Tacoma long bed. The part #TABSTRFK is a standard duty kit that comes with a U-bolt flip kit helps with ground clearance. #T72FR is a severe service kit for 3 leaf springs which…