Products Featured in this Video
Today on our 2013 Ford F150 well be test fitting the Thule Hitching Post Pro, part number TH934XTR. To begin our test fit, well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the threaded pin holes and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 17 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about six and a half inches. With the cradle arms folded down weve added about 16 inches to the overall length of the vehicle.
With the cradle arms folded out weve added about 37 inches to the overall length of the vehicle. To access the truck bed well pull the gold safety pin located at the base of the carrier and tilt the mast down. This will allow you to have access to your tailgate. To load the bike, well first make sure that the mast is in its upright position. Well pull the pin located at the top of the mast, pull the cradle arms out and undo the cradle straps.
Well set the bike onto the frame cradles and secure it with the cradle straps. That completes todays test fit for the Thule Hitching Post Pro, part number TH934XTR on our 2013 Ford F150.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.