SportRack EZ Hitch Bike Rack Review - 2013 Ford F-150

Review of the SportRack EZ Hitch Bike Rack on a 2013 Ford F-150

Today on our 2013 Ford F150 well be test fitting the Sportrack two bike carrier, part number A30901. To begin our test fit well slide shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 18 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 13 inches. Weve added about 25 inches to the overall length of the vehicle.

To have access to the truck bed, well pull the three pins located at the base of the carrier and tilt the wheel trays and the mast down. This will allow you to have access to your tailgate. To load the bike, well first make sure that the mast is in its upright position. Well put the frame hooks to the top of the mast and undo the cradle straps. Well set the bike into the wheel cradles, adjust the frame hook tightly against the frame and then secure it with the cradle straps.

That completes todays test fit for the Sportrack two bike carrier, part number A30901 on our 2013 Ford F150.