Today on our 2012 Dodge Charger, well be test fitting the Sport Rack two bike carrier, part number a30901. Now to begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, run our anti-rattle bolt through the pin holes, and tighten them with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about six inches of ground clearance. The closet part of the vehicle to the closet part of the carrier is about four inches. Weve added about 21 to the overall length of the vehicle.
With this bike carrier and this vehicle you can access the cargo area with a platform folded up or by pulling the three pins at the base of the carrier to fold the platform down. To load the bike, well make sure that the mast is in its upright position. Well put the frame hooks to the top of the mast and undo the cradle straps. Well set the bike into the wheel cradles, adjust the frame hook tightly against the frame, and secure it with the straps. That completes todays test fit for the Sport Rack two bike carrier, part number a30901 on our 2012 Dodge Charger..