bing tracking image

SnapPad Jack Pads Installation - 2020 Grand Design Reflection Fifth Wheel

content loading

How to Install the SnapPad Jack Pads on a 2020 Grand Design Reflection Fifth Wheel


Hey everyone, Shane here with etrailer.com. Today I have a 2020 Grand Design Reflection Fifth Wheel. I'm gonna walk you how to install the Camper Jack Snap Pads. That's what our pad's gonna look like when it's installed. Very easy installation, one-time installation. It doesn't have to be removed.

I got another one here, just so we can take a closer look at some of the different features that you can't see. When your foot plate's inside of here We have a hole here in the bottom and we have grooves here. This is to allow water to escape. So we don't corrode our factory foot plate. These are gonna be constructed out of a durable rubber.

They're actually made out of recycled tires. So they're not easily damaged at all. Having that rubber construction, is really gonna help grip on a lot of different terrains. So you know, if we compare it to just our factory foot plate which is a metal design if we're on a concrete surface and the terrains is on level these particular jacks are designed to lift our trailer up enough. So that we're level.

But if we take this metal plate and put it on concrete or asphalt or even rock for that matter it could potentially slide. Having the metal construction I'm sorry, rubber construction of these pads allows us to grip that surface much better. Now these are also going to have a much wider base. So our footplate is actually 10 inches where this is 11 by 11 and is gonna be two inches tall. Another nice thing about these is if you camp any locations that have asphalt or concrete pads they're going to require some kind of pad underneath your metal plate.

With these, we don't have to worry about getting boarded out, stacking them under there potentially slipping off of them. These pads once they're installed, are going to stay on. We don't have to do anything else. The pads are going to come in a variety of different sizes. Four different size foot plates and different shapes. So, here we have our round one we have installed. They also come in square and also round concave. You'll notice on the concave It's a little bit different, it's a little bit deeper. On the concave, the edges of the plate kind of roll up. That's why the lip is so high up. So it allows that raised section of the the side of the foot plate to grab underneath there so it holds on. To get the correct pad You want to make sure you measure your plate or your flip pad on your drag. And these are going to be nine inches. To start your installation, all you need to do is take some soapy water and we're going to spray this edge here. We're gonna take your pad. We're gonna line it up. With our jet foot plate. And then we're going to lower our deck until this pops onto that. Now maybe easier if you had two people somebody that can work the jack while you have it lined up because if you need to stop and readjust, you can do that. You just want to make sure you're not underneath of it while the jack is being lowered. Once you get one side on, you're going to repeat the process for any other jacks, you're adding snap pads to. That's gonna do it for our look at an installation on the Camper Jack Snap Pads on a 2020 Grand Design Reflection Fifth Wheel..


Questions and Comments about this Video