bing tracking image

SnapPad 12 Inch Round Jack Stand Pad Replacement Installation - 2011 Tiffin Allegro Bus Motorhome

content loading

Customers compare SP74FR4 to these similar products

Products Featured in this Video

How to Install the SnapPad 12 Inch Round Jack Stand Pad Replacement on a 2011 Tiffin Allegro Bus Mo

Right here we have a 2011 Tiffin Allegro. We're gonna be taking a look at some SnapPads. What sets these apart from some of the others on our site, these just stay on there. Once you have 'em installed, they'll stay there, so it's just one less thing you have to do. And I know packing for the trip sometimes it gets a little packed on the inside, so this is something you just don't have to take up any storage area on the inside of your RV. These will increase the surface area of your foot plate.

All you have to do is just measure the diameter of it for it to, you find the right one on our site. And pretty much, that's just gonna prevent us from sinking into some of the softer ground we may be leveling on. There's not really a whole lot to these. I think they are pretty nice just because we don't have to store them anywhere and they just stay on there. But two other things that make me feel confident about the purchase.

One it's recycled rubber. So we're using products that are just gonna get thrown in a dump and we utilize them, so that makes me feel good about the purchase. And also it's made in the US of A, which is awesome. One last thing that we need to do is just show you how to install them. Does not take a whole lot of time.

All you need is some soapy water and possibly a friend to lower the jack. So stick around, we're gonna show you how we did it. And it's probably not a bad idea once you get the whole entire pad dash down. Maybe start to get some of the sides of that, kind of wash the grid off. I think the cleaner the better.

So I'm just getting a little bit of the bottom of that pad. So then we'll go underneath, kind of line this up with the base, and then I will tell my friend to put it down once it's in place. All right. Lower it down. And as you can see, the back is going in pretty nicely, but the front isn't. So I'm gonna actually have 'em lift it back up. So as you can see over there, it's going in a little bit quicker, double than this, so I think I might just spray it a little bit. Squirt, squirt, squirt. You should see it kinda pop up once it's done. There you go. Look at that. And we are good to go and we can lift them up, and now they're gonna stay nice and put. And then we can move on to the rest. And it's just that simple, it's just a simple thing, so you don't really have to carry some of your pads in some of your storage areas, and that's pretty much it for a look at the SnapPads for your 10 inch round foot jacks. And that'll do it for a look at the SnapPads on our 2011 Tiffin Allegro..

Info for these parts were:

Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video by:
Chris R
Employee Jonathan Y
Video by:
Jonathan Y
Employee Shane H
Test Fit:
Shane H
Employee Adam E
Test Fit:
Adam E
Employee Andy C
Installed by:
Andy C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.