2012 Tiffin Allegro Motorhome Roadmaster Rear Anti-Sway Bar: Complete Installation Video

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

Hi Douglas, There are both front and rear anti-sway bars available for your 2020 Tiffin Allegro Bus 40IP on Tiffin's Powerglide chassis from Roadmaster. For The front you'll need part #RM97GR and for the rear part #RM99MR. If you're…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Phil, so since we know you have 10 inch octagon jack feet on your 2025 Jayco Alante 29s the SnapPad EQ part #SN76FR is for sure the correct fit. The Stromberg version is called the Base Pad Shoe and it looks like a horse shoe to me almost. I…

Hey George, you could use the Roadmaster Falcon part #RM-520 with D-rings on your Jeep bumper but you would need a D-ring adapter that is the correct size for what you have. The part #RM-035 would be the correct adapter if it's 3/4 inch d-rings…

Hello Chris, Great question, in fact it was such a great question that I needed to reach out to my contact at SnapPad because I could not find that information anywhere. He stated that the SnapJack SJ RV Scissor Jack Pads - Qty 4 #SN32FR will work…