Redarc Tow-Pro Liberty Brake Controller Installation - 2022 Chevrolet Colorado Video

There is no plug-in wiring adapter for a brake controller on a 2019 Chevy Colorado; most brake controllers such as the Prodigy P3 #90195 will need to be hardwired into the vehicle. For this you can use the Replacement Brake Control Plug-In Harness…

Yes, the Redarc Tow-Pro Liberty Brake Controller #RED52VR will fit your 2016 Chevy Colorado Z71. Sometimes our fitguide lists things this way when there isn't a custom wiring harness available. Rest assured, this will fit your truck and any other…

You will need to wire in the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector #HM11141144 on your 2018 Chevrolet Colorado. There is not a plug and play option available on vehicles which did not come with the factory tow package since…

In order to add a brake controller to a 2021 Subaru Outback you'll first need to start with a 4-way trailer connector, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118467 is what I recommend. It's plug and play.…

The trailer connected message is an issue with 2019 Ford Rangers, particularly with their 7-way wiring harnesses, and since the Curt Echo In-Line Wireless Brake Controller #C79DR installs in-line with the harness, it may have exacerbated the issue.…

Thank you for reaching out and for all of the information! If you're unable to find the connector for a brake controller under the dash or behind a panel for your 2021 Ford F-150 with the factory tow package then you probably do have a model that…

Trying to complete factory wiring on a vehicle can be a headache as it can be very difficult to find out where the missing link is on the wiring of the vehicle. It's possible you could find a wiring diagram for your vehicle and trace everything…

Your 2006 Toyota Highlander does not have a brake controller port under the dash of the vehicle so we do not have any install harness that would work. You will need to start with a 4-way (if you do not have one). For that you would want the #118413.…

If your Highlander has an active tow package plug located in the driver's side rear of the cargo area under the floor (see linked instructions for part #C56107 to see where plug is located and how to access it) your Highlander has the tow…

Since your 2021 Subaru Outback Wagon does not have factory trailer wiring you'd need to first install a 4-way with part #118467 and then convert it to a 7-way with a 7-way adapter like the part #37185 to give you the 7-way. But since you are…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

Yes, a standard manual brake controller wire can be routed in your 2021 Subaru Outback Wagon with a Universal Installation Kit for Trailer Brake Controller #ETBC7. The wires will need to be in your cabin. While it is not required to run the backup…