Today on our 2012 Kia Sorento well be installing the Rain-X Fusion windshield wiper blades, using part numbers RX880005 in the 20 inch length, as well as RX880008 in the 24 inch length. Before we install our new wiper blades well need to remove the old ones. Well simply lift them away from the windshield where we can push the tab here on the blade and slide down toward the windshield with the blade, removing it from the wiper arm J hook. Were now ready to fit our new Fusion wipers. Here on the drivers side with the 24 inch blade all well need to do is make sure that the tab is up on the blade. Well feed it into the J hook and make sure that we push it as far up into the J hook as possible.
We can then close the tab, securing the blade to the wiper arm. With the drivers side blade on, well go ahead and move over to the passengers side, and repeat the same procedure with the 20 inch blade. Now with both blades on, were ready to head out into the rain, snow and ice.That completes the installation of our Rain-X Fusion windshield wiper blades, part numbers RX880005 in the 20 inch length as well as part number RX880008 in the 24 inch length on our 2012 Kia Sorento.