Rain-X Weatherbeater Wiper Blades Installation - 2011 Toyota RAV4
Customers compare RX30224 to these similar products
Products Featured in this Video
How to Install Rain-X Weatherbeater Wiper Blades on a 2011 Toyota RAV4
All right, today on this 2011 Toyota RAV4 were going to install part #: RX30224 from Rain-X, this is our Weatherbeater windshield wiper blade. All right, to start off the test fit were going to go ahead and remove the factory blade. Theres a small tab that we have to push, then we can go ahead and release it from the arm. Okay, well push on the tab and pull back and itll free up from the arm. With it apart we can see the arm has a J-style connector, so our new windshield wiper blade will go right in the place. Well basically line up the windshield wiper blade with the arm, slide it inside, then make sure that the latch is in alignment with the arm, well go ahead and push it together until it clicks.
Were done with our driver side. Lets go and repeat the same process over on the passenger side. Thats going to be a different size and a different part number. Thatll be RX30217. Okay, a few other things to know about these windshield wiper blades, that it has a frame style design, it has multiple pressure points to hold the blade against the windshield and the rubber squeegee also has UV inhibitors to help protect it from the sunlight.
Okay and with that thatll finish it for our test fit of part #: RX30224 from Rain-X, the Weatherbeater windshield wiper blade on our 2011 Toyota RAV4.
Info for these parts were:
Installed by:
Jeff D
Installed by:
Adam E
Video Edited:
Joshua S
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.