Rain-X Fusion Wiper Blades Installation - 2011 Ford Fusion
Products Featured in this Video
How to Install Rain-X Fusion Wiper Blades on a 2011 Ford Fusion
Today on our 2011 Ford Fusion well be test fitting the Rain-X Fusion windshield wiper blades using part numbers RX880004 in the 19 inch length as well as part number TX880008 in the 24 inch length. To begin our test fit we need to remove the old wiper blades from the wiper arms. To do this well bring the wiper arm up where we can then push the little tab inside the J hook on the wiper arm and slide that blade toward the windshield. We can then remove it from the wiper arm where we will then set the arm down against the windshield. Well repeat this process for the passengers side. Now here on the drivers side well take the 24 inch blade where well lift up on the tab.
We can then bring our arm up and slide the blade into the J hook where well listen for the click. We can then close the tab and let the blade rest against the windshield. Well move over here to the passengers side where using the 19 inch blade well repeat the same installation process. Now with both blades on were ready to head out in the rain, snow or ice. That completes our test fit of the Rain-X Fusion windshield wiper blades using part numbers RX880004 in the 19 inch length and RX880008 in the 24 inch length on our 2011 Ford Fusion..
Info for this part was:
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Mike H
Video Edited:
Dustin K
Test Fit:
Patrick B
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Matthew K
Test Fit:
David F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.