Rain-X Weatherbeater Wiper Blades Installation - 2007 Honda Ridgeline
Customers compare RX30224 to these similar products
Products Featured in this Video
How to Install Rain-X Weatherbeater Wiper Blades on a 2007 Honda Ridgeline
Today, on a 2007 Honda Ridgeline, were going to do a test fit on part number RX30224 from Rain-X. This is our Weatherbeater Wiper Blade. A couple of things to know about this wiper blade is that it is designed to meet or exceed OEM standards. This wiper blade is constructed from a rust resistant galvanized steel frame, and the blade is constructed from all natural rubber with integrated UV inhibitors to protect it from the sunlight. Well start off our test fit by removing the original wiper blades. Theres a small tab located underneath the arm, that you push up and then you go ahead and pull the blade away.
Take the original one off and we can go ahead and install the new Weatherbeater blade. It basically installs in reverse process. Just slide it into place until it snaps. Were done with the drivers side, now well repeat the same process on the passenger side. Now the passenger side is going to be a different length, 22, and this part number will be RX30222.
All right, you can see how both sit on the windshield and with that, that will finish it for our test fit of the Rain-X Weatherbeater Wiper Blade, on our 2007 Honda Ridgeline. .
Info for these parts were:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Matthew K
Test Fit:
Randy B
Video by:
Zack K
Video by:
Andrew K
Video Edited:
Joshua S
Video Edited:
Patrick B
Video Edited:
Andrew L
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.