Putco Optic 360 High Power LED Fog Lamp Bulbs Installation - 2005 GMC Sierra

content loading

Customers compare P250010W to these similar products




Products Featured in this Video



How to Install the Putco Optic 360 High Power LED Fog Lamp Bulbs on a 2005 GMC Sierra


Today on the 2005 GMC Sierra Crew Cab, we're going to install part number P250010W. This is the Putco Optic 360 High Power LED Fog Lamp bulbs. For comparison, we'll go ahead and turn on the preexisting fog lights that are on the truck. Let's go ahead and try out our new ones. Now with the new light bulbs you can see how it provides much more illumination in a wider area than the stock bulbs did. Now the end of the bulb actually has an optic lens on the end to help disperse the light.

All right now to change out the bulbs is pretty simple. It's one whole unit, so let's go ahead and disconnect the electrical by pulling back on these tabs and then going straight down. And then we'll go ahead and take the bulb out. We'll rotate it, maybe almost a quarter turn, and pull straight out. Here's your new part right here.

Go ahead and line up the slots just like we did, and go ahead and rotate it back. And then we'll go ahead and install our electrical. Snaps right back into place. All right we're done with passenger side, let's do the same thing on driver's side. That'll finish it for part number P250010W, the Putco Optic 360 High Power LED Fog Lamp bulbs on our 2005 GMC Sierra Crew Cab.

.


Questions and Comments about this Video

What Do You Think?

* e-mail address format: [email protected]

I would like an email notification if someone replies to my comment

Info for this part was:

Test Fit:
Joe V
Video by:
Alan C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.