bing tracking image

Putco PURE Light Installation - 2007 Toyota FJ Cruiser

content loading

How to Install a Putco PURE Light on a 2007 Toyota FJ Cruiser

Today on our 2007 Toyota FJ Cruiser well be installing the Putco Pure Premium 7443 LED bulbs, part number P237443R360. First well open up the rear cargo door. Then well remove the access panel behind the drivers side tail light assembly. Well be accessing the white wire connector and brown socket. This is for the tail light, stop lamp circuit. To remove the white wire connector youll press on the locking tab and then remove it from the socket.

Now that we have it out and out of the way well go ahead and use a pair of needle nose pliers to gently turn the socket and remove it from the tail light assembly. Then well go ahead and take the old light, remove it from the socket and install the new Putco Pure Premium bulb. With our new bulb installed we can go ahead and reinstall the socket into the tail light assembly and then reconnect our wire. This is a set of two so well go ahead and replace the manufacturers bulb on the passenger side with the same process we just did here on the drivers side. Now lets go ahead and show you what the new lights look like.

Well go ahead and turn the running lights on and hit the brakes. As you can see these are high intensity LEDs that offer more light than the factory bulbs. There you have it for the Putco Pure Premium 7443 LED bulbs, part number P237443R360, on our 2007 Toyota FJ Cruiser.