Customers compare PK11898 to these similar products
Products Featured in this Video
Rob: Hey everybody. Rob here at etrailer.com. Today, we're going to be taking a look at the Pollak 7-way trailer connector on our 2000 Chevrolet Silverado. Now here's what our trailer connector's going to look like. It's going to provide us a 7-Way at the back of our truck so we can have all the required lights to get down the road with our… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thank you for submitting a photo of your vehicle wiring. Your 2000 Chevrolet Silverado pickup should have a trailer wiring harness at the rear bumper. This harness is often tucked in behind the spare tire or zip-tied to other wiring or to the…
view full answer...Thanks for the picture! Yes, it will. The old factory connector on your 2005 GMC Yukon XL Denali will pop out once you disconnect the wiring harness and you'll be able to insert the Curt Replacement OEM USCAR Trailer Connector item #C42JR.
view full answer...The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all…
view full answer...Because vehicle wire color coding can vary, even within the same model year, we always recommend wiring by function, not by wire color. At the vehicle assembly plant, if they run out of a particular color of wire, they will not shut down the assembly…
view full answer...I have included a couple of pictures that show where to plug in a brake controller on a 2001 Chevy Silverado. You are looking for the black junction box located towards the back left corner on the drivers side. Remove the cover and you will see a…
view full answer...The P3 part #90195 is basically the nicest brake controller on the market and we recommend it highly. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that…
view full answer...Most GM trucks use a pretty standard wire color for their tow packages, but I always recommend testing for function, and not just color. If you follow the bundle back there should be more wires than the ones you mentioned, for a total of 8.…
view full answer...The only difference between the Patriot Hitches Adjustable Drop Hitch Receiver Adapter part #PH67SR (Black Ops) and part #PH54FR (Red Ops) is the color. The former has black accents and the latter has red accents. The specs and everything else is the…
view full answer...The four wires in the bigger wire bundle on your 2000 Chevy Silverado are run as follows to the 4 inch Pigtail Wiring Harness for Pollak Replacement 7-Pole RV Socket, part #PK11998: Yellow is for the left turn and brake lights Dark Green is for right…
view full answer...For a replacement 7-way for your 1995 Ford F-250 I did some checking and it looks like the only part number I can recommend for you would be the part #PK11898. This will require you to hardwire the connector to your current 7-way wiring. I attached a…
view full answer...Determining between piano hinges, #H300 3 Inch Wide Steel 6 Ft Long or #SH200 2 Inch Wide Stainless Steel Hinge 6 Ft Long, depends what features you find more important for your application. The #H300 hinge will be stronger in that it is an inch…
view full answer...Most acrylic coatings of paint will adhere directly to cleaned galvanized steel like what the wheel part #AM3S560 has without the use of primer. As long as the rim is clean you would be okay to paint it.
view full answer...